Home - Return to Previous Page
Additional Images

Greddy Tuner Turbo Kit: Scion FR-S 2013-2016; Toyota 86 2017-2018; Subaru BRZ 2013-2018

Greddy Turbo Kit 11510094. 13-16 Scion FR-S; 17-18 Toyota 86; 13-18 Subaru BRZ Greddy Turbo Kit now available!! Greddy Tuner Turbo Kit is 100% Bolt-On and is big power proven. GReddy dyno test showed a +93.5 whp / +68.7 ft/lbs increase at 7 psi on stock vehicle.
Availability: Normally ships in 24-48 hours
Was: $4,700.00
Sale: $4,465.00
Save: 5%
Save: $235.00

Free Shipping!



13-16 Scion FR-S
17-18 Toyota 86
13-18 Subaru BRZ


With extensive testing both in Japan and the USA, this turbo kit was designed to enhance the overall performance for daily drivers and weekend racers. An ideal turbo sizing maintains the vehicles balanced driver feel, by maintaining good low-end response with the factory engine components. But the most noticeable improvements can be noticed on the factory power-band's dip in mid-range torque and at high RPM top-end power.

GReddy dyno test showed a +93.5 whp / +68.7 ft/lbs increase at 7 psi on a stock 2013 Scion FR-S with factory injectors and fuel pump, just adding a *GReddy-tuned EcuTek ecu, and a *GReddy Evo3 70mm exhaust, - (*not Included) But even more importantly, the mid-range torque from 3150-4750 RPM's are significantly improved over the stock torque curve.

The Tuner Turbo Kit includes: a top-mounted GReddy T518Z 10cm2 actuator turbo on an equal length 4-1 SUS header-type exhaust manifold with dual flex joints, SUS downpipe and cat-delete, free- flow Airinx AY-SB intake, short-routing intercooler piping, Type-40E front-mounted intercooler with cast end-tanks and all the necessary brackets, heat-shields, hoses, clamps, and gaskets.

GReddy Dyno results: +93.5whp* / +68.7ft-lbs* @ 7psi


  • Tuner Turbo Kit ( additional fuel management not included)

  • GReddy T518Z -10cm2 actuator turbo (top-mounted)

  • 4-1 SUS Exhaust Manifold with dual flex-pipes (header type)

  • Large SUS downpipe & front pipe (removes catlyic-conveters)

  • Free-flow Airinx AY-SM air intake

  • Aluminum intercooler piping (direct routing)

  • Type 40E Intercooler with end-tanks

  • Includes necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

    (2013 Scion FR-S with GReddy Evo3 exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
    **dyno results may vary depending on conditions, additional components & tuning

    Compatiable with GReddy Circuit Spec Oil Cooler Kit for FR-S ( p/n 12014632 )

  • Details

    Shipping Information

    • Item Requires Shipping
    • 50.0 lbs.
    • Free Shipping!

    Customer Reviews

    Comment Total Reviews (0)

    Write the First Review!

    You must login to post a review.