Energy Suspension Polyurethane Front Control Arm Bushings: Scion tC 2005 - 2010
Description
ENERGY SUSPENSION POLYURETHANE FRONT CONTROL ARM BUSHINGS
05-10 Scion tC
8.3120R - Red
8.3120G - Graphite (Black)
Maintain better alignment while cornering, stopping and hard launching than the soft OEM rubber. A must for BOTH lowered or raised vehicle where weight transfer causes distortion. All control arm bushings are full floating and non-binding . . especially important when ride height is altered or greater suspension load is required.
Better caster and camber is maintained during hard driving resulting from the correct durometer firmness. The rear control arm bushings are a MUST for controlling wheel hop and increasing cornering control. Many control arm bushing sets come complete with plated outer metal shells.
On the front of vehicles, they make a dramatic improvement in the way they handle, with quicker steering response and greater vehicle control. Whatever your demands, proper alignment (caster and camber) is better maintained by the use of the correct performance durometer of the bushing's material formulation.
KIT INCLUDES BOTH LEFT & RIGHT SIDES
Details
- 8.3120R / 8.3120G
- 8.3120R / 8.3120G
- Energy Suspension
- NORMALLY SHIPS IN 24-48 HOURS
- New
Shipping Information
- Item Requires Shipping
Customer Reviews
Total Reviews (1)
You must login to post a review.
Reviewed by: Grant01/12/2022 11:18PM
Product ownership: Less than 3 months
Purchased from: FastScions.com
Comments:
These things are great! Better handling and I remember on stock bushings at higher speed turns felt sketchy but now I feel a lot more confident in riding. Only thing to take in note. You need oem lower control arms! If you have a aftermarket lower control arm most likely the bushings you will burn out won’t be correct. But if you still have the control arms from factory you should be good!